Quick Answer: How Bright Should A Bedroom Light Be?

What is 60 watts in LED?

For example, if you need to replace a 60 watt incandescent bulb with an LED bulb, then divide 60 watts by 4 to get 15 watts – that will be a good estimate..

How many lumens does a room need?

To determine the needed lumens, you will need to multiply your room square footage by your room foot-candle requirement. For example, a 100 square foot living room, which needs 10-20 foot-candles, will need 1,000-2,000 lumens.

How bright should kitchen lights be?

– Kitchen Kitchen lights should be bright because you are working with knives and other cooking materials. For dark kitchens and more opaque fixtures, try 100 watts. If you get a lot of natural light, try using a slightly dimmer 80 watt bulb.

What color LED light is best for kitchen?

These bulbs are best suited for kitchens and bathrooms. Bright white (4,000 to 5,000 Kelvin) is between white and blue tones. With a less cozy and more energetic feel, bulbs with this color range are best for work spaces (such as a home office or garage) and kitchens with chrome fixtures.

How many lumens is considered bright?

100 lumens is considered bright enough for most walkways — including commercial properties. 100 lumens is equivalent to about 20 watts.

How many watts do I need for a bedroom light?

So if you have an 18′ long room x 12′ wide room multiply times 1.5 = 324 watts, that’s how much wattage is needed to adequately light the room. You can divide that lighting into more than one source. 2 Lamps @ 150 watts each and 1 lamp @ 60 watt would be more than adequate light for the room.

How many lumens do I need for a bedroom light?

Dining room: 3,000 to 4,000 lumens. Living room: 1,000 to 2,000 lumens. Bedroom: 1,000 to 2,000 lumens.

What type of lighting is best for bedrooms?

The 9 Best Lighting Picks for Your BedroomRecessed Fixtures. 1/9. Like any other room, a bedroom needs general lighting. … Sconces. 2/9. Wall sconces on either side of the bed can make nighttime reading all the more enjoyable. … Ceiling Fans. 3/9. … Table Lamps. 4/9. … Pendants. 5/9. … Portable Reading Lights. 6/9. … Standing Lamps. 7/9. … Rope Lighting. 8/9.More items…

How many lumens do I need for a 12×12 room?

For the average living room of 250 square feet, you’ll need 5,000 lumens as your primary light source (20 lumens x 250 square feet), equivalent to about five 100 watt incandescent light bulbs, five 23 watt CFLs, or eight 10 watt LED light bulbs.

Is 3000 lumens too bright?

A foot-candle is a measure of how bright the light will be when you are a foot away from the light source. … 30-40 foot candles are around 3,000-4,000 lumens. In other words, 3,000 lumens is meant to give a room a brighter light. This is not ideal if you have a small room and it’s a bedroom.

Is 800 lumens very bright?

The brightness, or lumen levels, of the lights in your home may vary widely, so here’s a rule of thumb: To replace a 100-watt incandescent bulb, look for a bulb that gives you about 1600 lumens. … Replace a 60W bulb with an LED bulb that gives you about 800 lumens.

How many lights do I need in a room?

As a handy rule of thumb, a sitting room or bedroom will generally require around 10-20 lumens per square foot, while a bathroom or kitchen will need a stronger level of lighting, at around 70-80 lumens per square foot. To work out the lumens you need, simply multiply the square footage of the room by this figure.