How Can I Find My BIOS Version?

Can BIOS update damage motherboard?

BIOS updates are not recommended unless you are having issues, as they can sometimes do more harm than good, but in terms of hardware damage there is no real concern..

How do I know if my BIOS is updated?

Press Window Key+R to access the “RUN” command window. Then type “msinfo32” to bring up your computer’s System Information log. Your current BIOS version will be listed under “BIOS Version/Date”. Now you can download your motherboard’s latest BIOS update and update utility from the manufacturer’s website.

What are the benefits of updating BIOS?

Some of the reasons for updating the BIOS include: Hardware updates—Newer BIOS updates will enable the motherboard to correctly identify new hardware such as processors, RAM, and so on. If you upgraded your processor and the BIOS doesn’t recognize it, a BIOS flash might be the answer.

How often does BIOS need to be updated?

It’s been a general rule to only update your BIOS when it is absolutely necessary, like when you have some sort of issue that you need fixed and a BIOS update has that fix listed in its changelog, and that if it’s just general tweaks that change very little, if at all, then you should ignore it.

How long does it take to update BIOS?

It should take around a minute, maybe 2 minutes. I’d say if it takes more than 5 minutes I’d be worried but I wouldn’t mess with the computer until I go over the 10 minute mark. BIOS sizes are these days 16-32 MB and the write speeds are usually 100 KB/s+ so it should take about 10s per MB or less.

How do I change BIOS settings?

How to Configure the BIOS Using the BIOS Setup UtilityEnter the BIOS Setup Utility by pressing the F2 key while the system is performing the power-on self-test (POST). … Use the following keyboard keys to navigate the BIOS Setup Utility: … Navigate to the item to be modified. … Press Enter to select the item. … Use the up or down arrow keys or the + or – keys to change a field.More items…

How do I check my BIOS version Windows 10?

Check BIOS version on Windows 10Open Start.Search for System Information, and click the top result. … Under the “System Summary” section, look for BIOS Version/Date, which will tell you the version number, manufacturer, and the date when it was installed.

How do I check my BIOS firmware?

Using the Command Prompt in WindowsClick Start menu, and type CMD in the search box. Select CMD.The command prompt window appears, Type wmic bios get smbiosbiosversion. The string of letters and numbers following SMBBIOSBIOSVersion is the BIOS version. Write down the BIOS version number.

Is it dangerous to update BIOS?

In general, you shouldn’t need to update your BIOS that often. Installing (or “flashing”) a new BIOS is more dangerous than updating a simple Windows program, and if something goes wrong during the process, you could end up bricking your computer.

What is the difference between a traditional BIOS and UEFI?

BIOS and UEFI are two firmware interfaces for computers to start the operating system. BIOS uses the Master Boot Record (MBR) to save information about the hard drive data while UEFI uses the GUID partition table (GPT). Compared with BIOS, UEFI is more powerful and has more advanced features.